Made back in March, released publicly just yesterday – “Refuge” is a film I produced that follows some very special people in Florida working to help homeless veteran’s have better lives.
Note: the below-mentioned film that involved scouting at the Guatemala City dump is still in the works, however I am waiting on a certain release/agreement form that would allow me to put the film online, so there’s nothing I can show you yet.
Following several visits and two days of filming at Parque Zoologico Arlen Siu on the edge of León, Nicaragua – this is the short documentary “Amigos del Parque” (friends of the zoo).
Parque Zoologico Arlen Siu is an abandoned zoo just outside of León, Nicaragua. Amigos del Parque Zoologico is an organization that works to keep the animals still in captivity there in good health, and to feed them every day.
These photos were taken on a scouting trip prior to filming for an upcoming short documentary about the Amigos and the park.
This is a great video that I edited and helped film in May and June of 2012.
Why We Hike from Actuality Media on Vimeo.
Hiking with Quetzaltrekkers was a great life experience, and one I will not soon forget. Nor will I ever forget the kids living at El Hogar that directly benefit from the work the volunteers at Quetzaltrekkers do. It was one of the most emotionally painful times of my life to listen to the sad stories of their lives – the horrors they have been put through – over and over again as I cut this film together. I cannot begin to imagine what their lives have really felt like, but I wish them the best and I’m glad they were willing to let us use their stories to help EDELAC as a whole.
Without a doubt, I’m going back to visit these guys next year and to play another game of football.
Jade is an internationally recognized word for a type of stone found worldwide – a stone you can probably recognize in passing.
The type found in Guatemala is classified as jadeite (the only other type of jade is nephrite), and jade is pronounced “ha-day.” The color tone of the un-worked jade stone can vary greatly, but a bit of water always makes it easier to spot, and once you know what to look for you begin to spot it all over – at least in Guatemala.
Finding your jade is an important first step when it comes to producing jade jewelry, but for an unseasoned jade worker like myself it is best to leave that hunt to the experts, which brings me to to my very important first step:
#1 – Find An Expert
In the small town of San Juan del Obispo, somewhere up on the slopes of the volcano Agua in Guatemala, I had the good fortune to meet and work with Francisco Zumiga.
He is local (native to Antigua) and has worked with Jade for years – he says the jade stones themselves speak to his heart. As a local it is also much easier for him to get the permit needed from the government to go scouring the mountainous countryside and return with his jade fare.
Francisco is also one of the friendliest people I’ve ever met. Basically he is the Gandalf of Guatemala.
He was nice enough to meet us at the central plaza of San Juan del Obispo and guide us to his home. Inside the outer fence you immediately start up a small path through the jungle-like front yard and stumble into the outer parts of his “workshop.”
We were introduced first to his dog Gift, who was so excited that he ran happily back and forth through the outer yard. Then his very friendly wife Odilia stepped out to greet us as well.
For this visit, “we” was Sandy (la profesora de los estudiantes de Oregon State), our translator Regina (de As Green As It Gets), and myself.
After introductions all around we had a short tour of the house and shop, a quick explanation of the machines (most of them made by Francisco and Franklin (de As Green As It Gets)),
and a general summary of how the whole jade process works for him – it’s properties, how he finds it, how it decides on it’s own what shape it shall take, and more.
#2 – Picking a Stone
There are many different looks to jade stones, even in Guatemala. Here they range from white (youngest) to many shades of green, to green that is so dark it is almost black (oldest).
Sometimes there are spots (for white jade spots the spots are purple, green jade have white or black spots) of varying intensity depending on the other elements present in the stone.
Sandy and I both decided to go with stones with pronounced jagged edges that, left intact, would highlight the rough rock-origin of the finished product. Francisco told us then that in a shop in the city this would never be allowed, nor has he ever thought to do it before. He added that a bonus to having people over to work jade with him is that they can always teach him something, too.
#3 – Choose a Design
There are two basic ways to decide on for fashioning your stone: mark a pattern of some sort on the jade or go freehand.
Francisco explained that he never picks up a piece with a style in mind, but rather it is the stone that commands what it shall be. Lucky for him, then, that not many should be desirous of the great effort required to make a jade frog.
Sandy decided to go for freehand and I went with a mostly oval (except for the rough edge) shape. Both of us intended to make pendants, a factor that decides later on where and how you drill a hole through the stone. A woman’s pendant requires a bit more style (that’s right MOM, this jade is for you!).
So with a child’s plastic stencil piece and a sharp, metal skewer-like tool, Francisco and I scratched out an oval on the surface and then, with a pencil, marked the lines I would saw off; a note, in the beginning you can scratch and mark up the jade stone all you want – everything will be polished away.
#4 – Cutting and Grinding
Stand firm, keep fingers pressing firmly down, and let the fast-spinning blade pull the stone to it. That’s the way to let the industrial diamond-tipped blade cut off the bigger (a loose term), unwanted sections of the stone.
Mostly, remember to keep the jade pressed flat. Oh, and ignore the “always wear goggles” safety warning; I was way more worried for my fingers anyway.
As Sandy had no firm design to follow, she skipped this part. Once I had finished we both stood at the free-standing sanding/buffing machine with the roughest paper on (like coarse sandpaper) to literally grind away what remained of the outer, undesired parts of the stone.
#5 – The Hole
As Sandy kept to grinding, I went into the shed part of the workshop (the only part of the place that was specifically designated a workshop – there were tools, stones and other pieces everywhere. No staff or wizard’s cap, though). Here Francisco demonstrated for me how to use his slick hole-drilling setup.Well, first we made a side trip to the dining room (better light) to mark on the stone where to drill the hole, then he showed me.
The drill itself is actually used dental equipment outfitted with an industrial diamond-tipped drill bit. The drill is mounted on a microscope-shaped device with a lever to raise and lower the drill as needed. The stone is held freehand, but there is no sense of danger this time and, once the hole is started, it feels like it would be really hard to screw it up.
So, seated at Francisco’s desk, my foot working the sewing machine pedal that controls the speed of the drill, bit by bit I drilled a hole through my stone. Frequent dips into a bowl of water, or bouts of splashing water on the stone, were required to keep the drill cooled off – it also made it easier to see the white cloudiness forming in the water as the jade was drilled away.
Once through, I switched the drill bit out to a wider-tipped bit to open the hole up a bit more for mounting on a clasp. Easy!
#6 – Polish, Polish, Polish
There are six grades of sandpaper material (it could have really been sandpaper, I guess that’s something to double check if I ever strike out on my own) used to polish and buff the jade. The first grade, Francisco told us, is by far the most important as it alters the stone and every setting after that follows suit.
He has several machines to do this work on, one a converted saw, the rest hand-made. The one you see Sandy working on here has a simple, ingenious hanging bottle and tube drip system tool cool the buffer off with water. Occasionally the stone would still get a bit hot and have to be dipped in water.
When working with any of the other machines we had to frequently dip the stones anyway, and oftentimes drip water on the grinder/buffer itself. A note: the buffers spin towards you, so you’re going to get a bit sprayed as well.
There is a very important tip for this step, too, that concerns the way the buffer/grinder spins. Holding the stone to the oncoming top half does polish the stone up, but for a much smoother feel on the surface and edges you need to hold the stone to the bottom half of the roll, where it begins to rotate away from you.
#7 – Take a Break
This is unnecessary if you are in a rush (but why rush yourself) or a groove, but Sandy and I were only too happy to take a breather at the dining room table, sip on some hot chocolate (el chocolate hecha in San Juan del Obispo tambien) and galletas (a word that is, in Guatemala, applied to biscuits, cookies and crackers – in this case it was cookies).
Unfortunately, Francisco suffers from diabetes and partook instead of black coffee and plain bread, but did share great stories of the jade business and his life. He even had pictures to show us of his visits to the mountains for jade (and other treasures) and of other peoples’s visits to his workshop.
Francisco is always very happy to host people, and even has people that come back a year or more later only too happy to work more jade with him. As such, he is trying to improve his English speaking skills and this is a great time to practice, though sometimes he has to fall back to Spanish for things he cannot explain. This brought us to discover something we had in common: there are many things he cannot say in English that he can understand when someone else speaks it in English – as long as it is spoken slowly. This is the same case for me with many words in Spanish.
#8 – Polish, Polish, And Polish Some More
Back to the Grind, Sandy and I slowly worked our way through the grades of sanding/buffing paper, angling and turning the stone every which way to get the smoothest and shiniest polish on our jade.
Francisco described the process as holding the stone to the machine and doing a dance to move it all around.
After polishing again and again and again I made it to the last grade of polish/buff, this time a loop of leather on the roll. Water is still used as a coolant, but a liquidy zinc paste is also applied to the stone while buffing to give it an extra shine.
Optional # 9 – Make it Wearable
For a guys jade piece it is easy to just thread a leather strap through the hole in the stone and be done. It’s easy and looks good – I bought just such a necklace while at Francisco’s house.
I wouldn’t do that to you.
Instead, I handed the stone off to Francisco for a few days, as did Sandy. He melts down silver and fashions clasps for his jade. Then he puts it on an adjustable leather strap.
So now, in my case, I hand the stone off again to have mailed to my mom.
I hope you like your jade!
For those who might like your own stone – by your own hand or Francisco’s, I have to recommend coming down to San Juan del Obispo first. Alas, if that isn’t doable there are a few ways to get a hold of his work if you talk to As Green As It Gets (www.AsGreenAsItGets.org). Etsy may soon be another way to make a purchase from Francisco – I pitched it to him and to AGAIG, I thing it would be a great way to get him in contact with more people.